Panasonic WJ-SQ308 - Manual (Page 3)

PREFACE FEATURES
Panasonic sequential switchers are excellent accessories
for multi-camera security systems. The WJ-SO308 is a 8-
input switcher with alarm.
This sequential switcher has two video outputs ;
alarm/sequential and alarm/spot monitor.
The alarm/sequential output displays each camera in
sequence is being displayed. The alarm/spot monitor out­
put permits manual selection of any camera for display on
a second monitor; when not used, this output automatical­
ly becomes sequential. Any camera switched to the "Spot
monitor" position is still included in the switching
sequence. A bypass switch allows any camera to be
bypassed from the switching sequence.
This sequential switcher also has vertical interval switching
for glitch free switching among synchronized cameras.
The length of time each camera is displayed during the
sequence is manually adjustable from 1 to 30 seconds.
1. Two video outputs ; alarm/sequential and alarm/spot.
2. Alarm/sequential output displays each camera in
sequence.
3. Front panel indicators show which camera is being
displayed.
4. Alarm/spot output for manual selection of any camera
for display on a second monitor.
5. Alarm/spot output : when not used, automatically
becomes sequential.
6. Any camera switched to the spot monitor position is
still included in the switching sequence.
7. Bypass switch skips any camera from sequence.
8. Vertical interval switching for glitch 'free switching
among synchronized cameras.
9. Switching interval manually adjustable from 1 to 30
seconds,
10. Switching interval can be externally controlled by Time
Lapse VTR or by another sequential switcher.
11. Loop-through video connectors with automatic termi­
nation are provided.
12. ALARM MODE
(1) Inputs for 8 sensors : door switch, window switch,
mat switch, etc.
(2) When a sensor is activated, sequential output is
automatically switched to that camera.
(3) If two or more sensors are activated, the switcher
. automatically switches between those cameras
that are in the alarm mode.
(4) Front panel LED indicates alarm condition.
(5) Alarm can be manually reset by switch on front
panel.
(6) Automatic reset of alarm after 1 to 5 minutes inter­
val (internally adjustable using VR2). Refer to the
ADJUSTMENT on page 10.
(7) Ideal mate for Panasonic Time Lapse VTR.
(8) Switcher alarm output activates Time Lapse VTR
alarm mode : VTR changes its recording speed
for greater detail during alarm period.
(9) Switcher can reset VTR alarm mode, or VTR can
reset switcher alarm mode.
-
1
-