Panasonic CQ-C8300U - Manual (Page 26)

Radio
Stereo indicator [<][>]
(TUNE) (Preset station)
[SOURCEl [D-Ml (Direct Memory) [BAND]
(APM:
Auto Preset Memory)
Radio Mode
Press [SOURCE] to select the radio mode.
Radio mode display
Band Frequency
^ ■5»
1 BBTin------ 1
Direct Memory (D IVn
Band
Press [BAND].
FM1 1-^1 FM2 |->| FM3 l-M AM
±
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ I
^ T u n i n g
[>]: Higher frequency
[<]; Lower frequency
Press and hold I<] or [>1 for more than
0.5 seconds, then release. Seeking will start. * •
Note:
• When pressing [MENU] (pressing and hold
[MENU] for more than 2 seconds on the remote
control unit) in radio mode, the following display
appears.
This is because radio
mode does not have
any menu settings.
This is a useful function that can call broadcast
stations directly during playback in other modes (CO,
CD Changer, etc.), even when the power is off.
Your favorite radio station can be memorized in
[D-M] (direct memory).
Default: FM 87.9 MHz
■ Memorize
0 Select a band and frequency.
© Press and hold [D-M] for more than
2 seconds.
• Frequency blinks once and is saved in the
memory.
IPMi ”T-
____ X___
Note:
• New stations overwrite existing saved
stations after this procedure above.
■ Recalling the Direct Memory
Press [D-MJ.
Direct Memory mode
Press [D-M] again to cancel.
26
CQ-C8400/8300/8200/8100U