Panasonic PV-840F - Manual (Page 8)

Playback a Tape
D All connections are made.
□ TV and VCR are plugged in.
□ TV is turned on and set to the VCR channel (CH 3 or 4).
D Remote is in VCR mode.
Check list before you begin.
Insert a cassette.
• VCR power comes on and VCR
appears on VCR display.
STOP/ EJECT
• To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
Press PLAY.
• Playback begins if cassette has
no record tab.
To Find a Particular Scene
Forward Search -> Press FF.
Reverse Search --> Press REW.
For Slow Motion --> Press SLOW.
(To release, press SLOW.)
For Still (Freeze) picture --> Press PAUSE.
(To release, press PAUSE.)
For Frame by Frame picture --> Press SLOW in Still mode.
(To release, press PAUSE.)
• To reduce picture noise, see "Manual Tracking Control" on
page 29.
• After the VCR is in Still or Slow mode for 3 minutes, it will
switch to Stop mode automatically to protect the tape and
the video head.
To Stop --> Press STOP.
To rewind tape --> Press REW in Stop mode.
To fast forward tape --> Press FF in Stop mode.
To eject tape --> Press STOP/ EJECT on the VCR.
Playback using VCR controls
11nsert a cassette.
2
Press PLAY.
u--------------------- n 7-^
{( ©5(yb
8
Press to stop and/ or
eject tape.
For assistance, call 1-800-211-PANA(7262).