Panasonic PV-840F - Manual (Page 25)

‘Important: If the remote control POWER, ACTION, PROG, CHA/ t , INDEX, or ADD/DLT button does not
work when pressed, press the VCR button on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When “ON" is selected, picture is displayed even when broadcast
signal is weak or nonexistent.
1 Display menu.
Press ACTION.
2
MENU
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
IDlOMA/LANGUE:ENGLISH
SELECT: A T KEY
SET :► KEY
Display SET UP CHANNEL.
1) Press AT to
select.
2) Press ► to
display.
3
------- SET UP CHANNEL -----------
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
OFF WEAK SIGNAL DISPLAY
SELECT: A T KEY
SET :► KEY
Set ON or OFF.
1) Press AT to
select.
2) Press ► to set.
• ON -> Picture is displayed regardless of signal condition, and
may not always be clearly visible.
OFF -->Screen turns solid blue when signal is absent or weak.
• If VCR is connected to equipment which has blue back feature,
selecting ON will have no effect on the other equipment.
4
Return to normal
screen.
Press ACTION twrice.
Auto Shut-Off Feature
When “ON” is selected, VCR shuts itself off when playback of a blank
portion of tape continues or no signal (except when LINE is selected) is
detected for over 5 minutes.
Repeat step “a" and “b” on page 24 to
display SET UP VCR.
2
SELECT/
• S E T
3
A;PLAY
• T:STOP
b ►
1
ACTION
4
c
b
SET UP VCR
REPEAT PLAY OFF
TIME STAMP ON
REMOTE WARNING ON
AUTO SHUT-OFF^^H ON
SELECT:A ▼ KEY
SET :► KEY
END :ACT I ON KEY
Set ON or OFF.
1) Press AT to
select.
2) Press ► to set.
Return to normal
screen.
Press ACTION twice.
25