Display set up vcr, Set on or off, Return to normal screen – Panasonic PV-840F User Manual
Page 18: Display counter, Reset to ‘‘0:00:00, Continue playback, rewind, or fast forward, Return to “0:00:00, Tape operation, Continued), Repeat play
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Operation
(continued)
Repeat Play
Set to see a recording over and over.
1
Display menu.
Press ACTION.*
2
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ID I ОМА/ UNGUE; ENGLI SH
SELECT:Ж т KEY
SET :► KEY
Display SET UP VCR.
1) Press AT to select.
2) Press ► to display.
3
----------- SET UP VCR
REPEAT PLAY
TIME STAMP
REMOTE WARNING
AUTO SHUT-OFF
SELECT:* ▼ KEY
SET :► KEY
END
:ACT I ON KEY
Set ON or OFF.
1) Press AT to select
“REPEAT PLAY.”
2) Press ► to set.
Playback repeats when tape end is
reached or unrecorded portion over 30
seconds is detected.
Return to normal screen.
Press ACTION twice.
Zero Search
To quickly return to specific tape counter location.
a
DISPLAY
Display Counter.
Press DISPLAY during playback.
PLAY 12:OOAH
0
:
00:00
SP
Reset to ‘‘0:00:00.’’
Press COUNTER
RESET at the desired
position.
Continue playback, rewind, or fast forward.
STOP 12:00AM ABC
0:00:30
SP
Return to “0:00:00.”
Press ZERO/1 MIN
in Stop mode.
[_J
• The VCR will go into FF
or REW mode and stop at
the last point the Counter
was set to 0:00:00.
^Important:
If the remote control POWER,
ACTION, PROG, CH
A/T,
INDEX,
NUMBERED keys, INPUT,or ADD/
DLT button does not work when
pressed, press the VCR button on
the remote and try the button again.
SELECT/
SET
▲ :PLAY
T :STOP
► ;FF
1
ACTION
4
a DISPLAY
d ZERO/
: 1MIN
h COUNTER
RESET
One Minute Skip
VCR fast forwards over 60 seconds
of recorded tape.
A
ZERO/
D
1 MIN
Press ZER0/1MIN
in Play mode.
18
For assistance, call 1-800-211-PANA(7262).