Panasonic PV-840F - Manual (Page 28)

VCR & Cassette Information
Reset all VCR Memory Functions
Use when moving VCR to new location, or if a mistake was
made in the One Time VCR Setup section.
• Make sure a tape is not inserted in the VCR.
Prevent Accidental Tape Erasure
Press and hold both PLAY
and CHANNEL A on the VCR
for more than 5 seconds.
• The power will shut off.
3 Do “One Time VCR Setup” steps on page 6.
Break off the tab.
DST (Daylight Saving Time)
VCR auto adjusts clock for DST. {Page 7.)
Spring (First Sunday in April)
DST:ON --> sets clock ahead one hour.
NORMAL TIME
1:00 a.m. 2:00 a.m.
DAYLIGHT i----------------------
p.
SAVING TIME 3:00 a.m. 4:00 a.m.
Autumn (Last Sunday in October)
DST:ON -> Turns clock back one hour.
DAYLIGHT
SAVING TIME 1:00 a.m. 2:00 a.m.
NORMAL TIME
1:00 a.m. 2:00 a.m.
• If your area does not observe Daylight Saving
Time, select DST:OFF. •
• Keep these time changes in mind when
programming the VCR for timer recordings.
Record/Playback Time
Only use tapes with the №1 mark in this unit.
Tape Speed
Setting
Type of Video Cassette
T60 T120 T160
SP
(Standard Play)
1 Hour 2 Hours
2 Hours
40 Minutes
LP
(Long Play)
2 Hours 4 Hours
5 Hours
20 Minutes
SLP
(Super Long Play)
3 Hours 6 Hours 8 Hours
28
For assistance, call 1-800-211-PANA(7262).