Panasonic NVHD650 - Manual (Page 7)

Infra-red Remote Controller
c
o
•C3
.Q-
o
CO
Qi
Q
13 STOP
To stop any playback or recording.
14 INDEX
For the index search function.
15 \//\(TV)
To select the required programme position {TV station)
of the TV,
16 VOLUME
To adjust the volume of the TV.
17 Infra-red Transmitter
18 s/ /\
To programme a timer recording.
19 DATE
To programme a timer recording.
20 DISPLAY
To change the indication on the VTR Display.
p^Clock^Counter-^Remaining Tape Time —|
21 RESET
To reset the tape counter (elapsed time) to “0:00.00”.
•The tape counter is automatically reset to “0:00,00”
when a video cassette is inserted.
22 PROG
To set and check timer programmes.
23 ZERO STOP
For the zero stop function.
24 CANCEL
To cancel the settings made for a timer recording.
25 INPUT SELECT
To select the A1 or A2 external recording source.
26 VTR/TV
To select the VTR mode or TV mode.
(NV-HD650A: No function.)
27 SPEED
To select the tape speed desired for recording.
SP gives the best picture quality.
LP gives the longest recording time.
28 TV SELECT
To set the remote controller for operation of the TV.
29 MENU
To make OSD menu appear on the TV screen.
30 ENTER
To confirm the selection, or to store.
31 A ▼
To make selections from On Screen Display.
32 Programme Position Selector Buttons
•To select the programme positions (1-99).
9: CO
19: (-/--)—( 1 )—C 9 j
• To programme a G-Code number.
33 G-Code
For the G-Code programming.
34 TIMER REC
To turn the timer recording function on and off.
[3 is lit or not lit,
Once operating timer recording function, the norma!
VTR operation is not possible unless this button is set
to off.
35 AUDIO OUT
To select the desired sound mode.
At the every push of this button, the audio output mode
changes as follows,
»Stereo->Left—»-Right^Norma! audio track-
c:
The Left (L) and Right (P) Indicators show which sound
mode is selected in the following way.
Stereo; Both the Left (L) and Right (R) Indicators
appear.
Left: The Left (L) Indicator appears.
Right: The Right (R) Indicator appears.
Normal: Both the Left (L) and Right (R) Indicators
don’t appear.
36
OFF
To programme a timer recording.
37
ON
To programme a timer recording.
Power Source for the Remote Controller
The remote controller is powered by 2 “AA”, “UM3" or “R6”
size batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
•Load the new batteries with their polarity (© and ©)
aligned correctly.
•Do not apply heat to the batteries, or an internal
short-circuit may occur.
•If you do not intend to use the remote controller for a long
period of time, remove the batteries and store them in a
cool and dry place.
• Remove spent batteries immediately and dispose of
them.
•Do not use an old and a new battery together, and never
use an alkaline battery with a manganese battery.
Installing the Batteries