Panasonic NVHD650 - Manual (Page 23)

Manual Recording
To select the Desired Tape Speed
Press SPEED before recording.
SPEED
o
fê'iS'iill
To interrupt Recording
Press PAUSE/STILL during recording.
Press again to continue recording.
¡y-' (--A.-.
PAUSE/
STILL
0
To record One TV Programme while
Viewing Another Programme
1 Refer to the manual recording operations steps 1 to 4.
2 Press VTR/TV to select the TV mode.
(NV-HD650EA only)
3 Select the TV programme on your TV set you wish to
view at the present time.
To display the Approximate Remaining
Tape Time
1 Select TAPE SELECT on OPTION on screen display
and select the corresponding cassette tape length. See
page 18.
On Screen Display
0“
0 0
« > o
MENU
.
........................ OPTION
-’TAPESELeCr'-
’*HT8(T”'HTSS E24Ы Л260
TAPE SPEED «SP LP
AUmOMIX ON «OFF
SLUE BACK «ON OFF
~/+ :oa
END:MENU
El 80: For E30, -60, -90, -120, -150 and -180 tapes
£195: For E195 tape
E240: For E240 tape
E260: For E260 and -300 tapes
2 Press DISPLAY.
DISPLAY
Ô
|-»Clock^Counter->Remaining Tape Time
•The remaining tape time may not be displayed correctly
depending on the tape used.
Notes:
•When a video cassette with a broken off tab is inserted,
the “S3" indication will flash to indicate that recording is
not possible.
•The recording pause mode will be automatically released
after 5 minutes. Revert back to the stop mode.
The NICAM Broadcast System
(NV-HD650EAonly)
NV-HD650EA is equipped with the NICAM sound system.
NICAM is a 2 channel sound broadcast system to provide
either a high quality stereo sound track or 2 independent
MONO sound tracks, Ml and M2.
NICAM programmes are always accompanied by standard
sound broadcasts and you can select the desired sound
with AUDIO OUT during playback.
•The NICAM digital stereo sound can only be recorded on
the Hi-Fi audio track.
•When NICAM programme is being received, the indicators
are lit to inform you of the type of broadcast.
(See page 30.)
•To record the regular sound (ordinary normal sound) on
the FM audio tracks when a NICAM programme is
received, select MONAURAL ON. (See page 19.)
•To hear stereo performance connect as shown on page 8
to a TV or Stereo Amplifier with left and right audio inputs.
Important Note for the NICAM System
When N V-HD650EA is switched on, the tuner will
automatically switch to a NICAM broadcast, if NICAM is
being transmitted.
At this time the NICAM signal is transmitted on stereo
channels only, since the M1 and M2 formats are not yet
available. Even if the sound track is in MONO, the stereo
indicator will appear.
23