Editing, Preparations, Set ntsc select – Panasonic NVHD650 User Manual
Page 27: Operations, Note, Assembly editing, Synchronized editing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing
Timer Recording
Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of a previous one.
Preparations
•Connect a movie camera or another VTR to this VTR as
shown.
• Insert a recorded cassette tape with an intact erasure
prevention tab.
•Select the video source required by pressing
INPUT
SELECT
to set A1 or A2.
A1; Through the AV1 (AUDIO IN/VIDEO IN) sockets,
A2; Through the AV2 (AUDIO IN/VlDEO IN) sockets on
front panel.
•Set NTSC SELECT.
NTSC P.B.: When recording in the PAL system.
4.43:
When recording NTSC 4.43 signals from
External Signal Source.
When dubbing an NTSC tape, keep the
NTSC SELECT
on both the recording and playback units at the 4.43
position.
Operations______________________
1
Press
PAUSE/STILL
on the recording
VTR.
0
Press
REC
to switch the VTR from the
pause mode to the recording standby
mode.
0
SYNC EDIT
AUDIO IN/ViDEO IN (AV1)
O Search for the end of the previous
^ recording.
Start the new recording by pressing
PAUSE/STILL
again.
5
Press
STOP
to stop recording.
STOP
_______________
0
______________
Note;
The new sound wilt be recorded on both the normal and
Hi-Fi sound tracks, only monaural sound recording is
possible on the normal sound tracks.
Synchronized Editing
It is possible to synchronize the playback start and stop of
the Movie Camera with the recording start and stop of this
VTR.
Preparation
Connect a Movie Camera to this VTR with Synchro
Connection Cord (VW-K1E).
1 Put the VTR in the recording pause mode by pressing
PAUSE/STILL
(VTR) and
REC.
2 Put the Movie Camera in the still playback mode at the
point where you want to start editing.
3 Press
PAUSE/STILL
on the VTR.
•The Movie Camera changes over to the playback mode
and the dubbing will start automatically.
Synchronized Editing between the VTRs
When editing from another VTR equipped with Synchro Edit
Socket, synchronized start and stop of both VTRs can be
activated from this VTR.
The operation is the same as described for synchronized
editing from a Movie Camera.
27