Panasonic NVHD650 - Manual (Page 14)

storing TV Broadcasts into your VTR
Introduction
The VTR is fitted with its own tuner (just like a norma! TV
set) and can be pre-set to receive up to 99 TV broadcast
stations.
Preparations
•Confirm that the TV is on and the VTR viewing channel is
selected.
•Turn on the VTR and select the programme position
except A1 or A2.
• Press VTR/TV to select the VTR mode.
{NV-HD650EA only)
Auto Tuning Procedure
Operations
r
PRE-PROGRAMMED TV CHANNELS
(NV-HD650A)
The local TV transmission channels 2, 7, 9,10 and 28
are factory-preset in this VTR. That is, if you can
receive television broadcasts on VHP channels 2, 7,
9,10 and on UHF channel 28, these are already
tuned on the programme positions with the matching
numbers.
However, it is possible to cancel these presettings
and tune the local TV broadcast channels on any
desired programme positions.
For alternative settings and tuning of additional TV
broadcasts channels, follow the Tuning Operations.
On Screen Display
1
Q
OSD MENU
•tANQUAGE
CLOCK SET
TUNER PRESET
OPCODE CH SET
OPTION
DEMONSTRATION
SELECT
END :aD.EHTER
¡MENU
Press MENU.
^ 0
0
□
ENTER
OSD MENU
LANGUAGE
CLOCK SET
• TUNER PRESET
G-CODECHSET
OPTÎON
DEMONSTRATION
SELECT : as,ENTER
END ;MENU
1 Select TUNER PRESET.
0
0
© ©
ON «OFF
-AUTO TUNE-
SEARCH’” 1
FINE
SELECT: DO
Select AUTO TUNE and
press ◄ or ►.
•When the Auto Tuning finished, On
Screen Display disappears and
programme position 1 is selected.
r
SEARCH J+i ENbrlil^U
Notes:
•The Auto Tuning is searching for TV station from VHP
minimum to UHF maximum and memorizing the data for
every programme position. The other programme
positions are skipped.
•The Auto Tuning takes seven or more minutes to
complete the search.
• If VTR is not correctly tuned by Auto Tuning, foilow the
procedure on next page.