Panasonic PV C923 - Manual (Page 9)

REMOTE CONTROL
10
11
12
13
14
22
'23
24
25
26
27
-28
DESCRIPTION OF CONTROLS
1- POWER Button - Press to turn the TVA/CR on. Press
again to turn the TVA/CR off.
2. Direct Channel Selection Buttons (0*9) * Allows
direct access to any channel.
3 . EJECT Button * Press to eject the tape.
4. MENU Button - Press to display the On-Screen menu
function.
5. MUTE Button - Press to turn off the sound. Press again
to turn the sound back on.
6. REW (Rewind) Button * In the Stop mode, this button
rapidly winds the tape backwards. In the Play mode,
this button activates reverse search.
7. COUNTER RESET Button - Used to reset №e counter
to 00:00:00.
8. SPEED Button * Sets the tape speed for recording.
9- CC Button * Switches between Caption, Text and TV
modes for Closed-Capiloned programs-
SET/TRACKiNG +/- Buttons * Used to set or adjust in
the menu mode. During playback they are used to adjust
manually.
CANCEL Button <• Used to clear the selected program
and to move the cursor backward.
VOL +/- Buttons “ Press the + button to increase, or
the - button to decrease the volume level.
CM SKIP Button <• Press In the playback mode to
search forward in 30 seconds increments to a
maximum of 3 minutes.
PROGRAM Button - Press to confirm the programmed
timer recording and ON/OFF timer.
SLEEP Button * Sets the TV to turn off automatically
after up to 120 minutes.
10 ,
11
12 .
13.
14.
15
.
16. INPUT Button - Switches the program for viewing
between the VCR and external input sources.
17. CH A/T Buttons * Press the A button to change to a
higher numbered channel set into memory. Press the ▼
button to change to a lower numbered channel set into
memory.
18. PLAY Button - Press to play a prerecorded tape.
19 . STOP Button * Press once to stop the tape.
20. ZERO SEARCH Button * Use to stop the tape when the
counter reaches 00:00:00.
21. REC/OTR Button * Press once to Start normal
recording. Additional presses activate One-touch Timer
Recording.
22. R-TUNE Button * Switches between the present
channel and the last channel selected.
23. ENTER Button »Press to enter or select information
for On-Screen operafions.
24. DISPLAY Button - Displays the present time/day of the
week, channel, counter, speed selection (and VCR
mode if VCR is playing) on the TV screen.
25. FF (Fast Forward) Button - In the Stop mode, this
button rapidly winds the tape forward, in the Piay
mode, this button activates forward search.
26. PAUSE/STILL Button * During recording, this button
temporarily stops the tape. During playback, it stops
the tape and displays a still image on the TV screen.
27. TRACKING AUTO Sutton * All ows automatic
adjustment of tracking to minimize picture noise during
playback.
28. PROG TIMER Button - Used to set the TVA/CR to
start recording at a preset time. ^