Panasonic PV C923 - Manual (Page 12)

This TVA^CR has an extencied tuning range and can tune most cable channels without using a Cable TV
converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled.
Descrambling these signals for normal viewing requires the use of a descrambler device which is generally
provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a Converter/Descrambler box,
connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack
on the back of the TVA/CR.
Antenna Jack
75 ohm
Coaxial Cable
UHF/
VHF
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the incoming
75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack
of the Converter/Descrambler box to the Antenna Jack on the TV/VCR. Follow the connections shown below. Set the
TV/VCR to the output channel of the Converter/Descrambler box {usually channel 3 or 4) and use the Converter/
Descrambler box to select channels.
Incoming 75 ohm
CATV cable
Antenna Jack
Converter/Descrambler
75 ohm Cable to TVA/CR
UHF/
VHF
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the
Cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"
position, you can directiy tune any nonscrambled channels on your TV/VCR. With the switch in the "A" position, tune
your TV/VCR to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to tune scrambled channels.
Incoming
75 ohm
CATV cable
Converter/Descrambler
Splitter A/B Switch
75 ohm cable
to TVA/CR
Antenna Jack
UHF/
VHF
SETTING THE LANGUAGE
This TV/VCR can display the on screen language in
English, Spanish or French.
On-screen language selection (step 3) will automati­
cally appear on the screen when you press the MENU
button Initialiy. Select the language you prefer first,
then proceed with the other menu options.
1 Press the MENU button.
Press the SET/TRACKING + or -
button to select the SYSTEM
SETUP option, then press the
ENTER button.
^ÍE^U
■ TIMER REC SET
■ TV SETLP
ICHSETUE
WAUTO REPEAT ONWFF
-ÎSYSTEM SETUP
12
2 Press the SET/TRACKING + or
“ button to select the LAN­
GUAGE option, then press the
ENTER button.
3 Press the SET/TRACKING + or
- button to select the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANÇAIS), then press the
ENTER button.
4 Press the MENU button until the
MENU screen is cleared.
SYSTEM SETUP
JKÍL0CK SET
-¥ LANGUAGelDlOMAflJiiKajE
ŸAUTO CLOCK NDN OFE
I STATOAftD
I DAYLIGHT SAVING TIME
{iWÊNTËR/MÉNLJ)
LANGUA(^ í D í C ím IA.'L«NG l £
►ENaiSH
ESPAÑOL
FRANÇAIS
(+WENTERJMENU)