Panasonic PV C923 - Manual (Page 27)

^ SYMPTOM CAUSE POSSIBLE SOLUTION page ’'
TV shuts off.
TV station stopped broadcasting. Tune new channel. 14
Sleep timer is set. Set Sleep Timer to "0". 15
Closed caption is not
activated.
TV station experiencing problems or
program tuned is not closed caption.
Try another channel-
14
TV signal is weak. Check CATV connection of VHP/
UHF antenna, reposition or rotate
antenna.
11,12
The CC button is not depressed. Press the CC button to turn on the
closed caption.
15
RECORDING
TV recording does not w/ork.
The video cassette's erase prevention
tab is broken off. Place a piece of vinyl tape over the
hole.
20
Timer recording does not
work.
The time Is not set correctly. Reset the present time. 14
The recording start/end time is not
set correctly.
Reset the start/end time.
22
The PROG TIMER button has not been
pressed {The PROG TIMER Indicate«’ Is not lit).
Press the PROG TIMER button
{The PROG TIMER indicator is lit).
22
PLAYBACK
Noise bars appear on the
screen.
Tape is old or worn. Replace the tape.
Tracking adjustment is beyond range
of automatic tracking circuit. Adjust tracking manually using the
SET/TRACKING + or - buttons on
the remote control.
20
Video heads are dirty. Clean the video heads. 25
REMOTE CONTROL
Remote control does not
operate.
The remote control is not aimed at
the sensor. Aim the remote control at the
remote sensor.
10
Distance is too far or too much light
in the room. Operate within 15 feet or reduce
the light of the room.
10
There is an obstacle In the path of
the beam. Clear the path of the beam.
10
The batteries are weak. Replace the batteries. 10
The batteries are not inserted
correctly. Insert correctly.
10
/
If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at
1-800-211-PANA(7262).
To locate an authorized servicenter call toil free 1-800-211-PANA(7262) or send e-mail to :
consumerproducts@panason lc.com.
27