Panasonic PV C923 - Manual (Page 13)

AUTO CLOCK SETTING
The Auto Clock function will automatically set the
built-in clock (Month, Day, Year and Time) when the
TV/VCR is connected to an Antenna or Cable system
and it is turned off. As the TV/VCR searches for a
receivabie station in your area and it receives a
broadcast signal for Auto Clock, the Auto Clock needs
several minutes to set itself.
AUTO CLOCK SETTING
1 Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2 Plug the AC Power cord to the AC outiet.
3 Make sure the TVA/CR is turned off.
• If you press the POWER button, the Auto Clock set Is
not effective.
4 Wait at least three minutes and press the POWER button,
5 Press the DISPLAY button to check the clock on the
screen.
6 If the clock is not set, check the Antenna condition. The
Auto Clock may not function properly If the reception
condition is not good.
AUTO CLOCK ADJUSTMENT
TO SET AUTO CLOCK TO OFF
When shipped from factory the AUTO CLOCK option is
set to ON.
But if you do not want Auto Clock set (Adjustment):
Turn on the TVA/CR.
Press the MENU button.
Press the SET/TRACKING + or - button to select the
SYSTEM SETUP option, then press the ENTER
button.
Press the SET/TRACKING or — button to select the
AUTO CLOCK option.
Press the ENTER button to select OFF.
Press the MENU button repeatedly to return to the
normal screen.
• When the AUTO CLOCK is set to OFF, the Auto Clock
adjustment does not function.
• Set the clock manually (see page 14).
TO SET STANDARD TIME
In the rare event that you live within broadcast range of
two stations in two different time zones, the TV/VCR
may recognize the wrong station for the Auto Clock set.
To correct the situation;
1 Press the MENU button,
2 Press the SET/TRACKING + or - button to select the
SYSTEM SETUP option, then press the ENTER button.
3 Press the SET/TRACKING + or - button to select the
STANDARD TIME option, then press the ENTER
button.
4 Press the SET/TRACKING + or - button to select your
time zone, then press the ENTER button.
ATLANTIC : GMT - 4 hours
(GMT: Greenwich Mean Time)
GMT — 5 hours
hours
hours
hours
hours
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
AUTO
GMT-
GMT-
GMT-
GMT-
GMT- 10 hours
AUTO SET
5 Press the MENU button until the MENU screen is
cleared.
NOTES: • To be able to select the standard time, the
clock must first be set by “AUTO CLOCK” once.
• When shipped from factory, the STANDARD
TIME option is set to AUTO.
DAYLIGHT SAVING TIME SETTING
You can set the Daylight Saving Time "ON" or “OFF”.
The Auto Clock Adjustment will be performed at 12:00 PM
everyday if you turn off the TV/VCR.
• if you use a cable box and you want Auto Clock adjust­
ment to be performed, the cable box must be left on.
• The Auto Clock Adjustment is not effective when there
is a difference of more than 5 minutes exists between
the built-in clock time and the actual time.
Press the MENU button. Press
the SET/TRACKING + or-button
to select the SYSTEM SETUP
option, then press the ENTER
button.
Press the SET/TRACKING + or -
button to select the DAYLIGHT
SAVING TIME option, then press
the ENTER button.
Press the SET/TRACKING + or -
button to select “ON” or “OFF”,
then press the ENTER button.
Press the MENU button until the
MENU screen Is cleared.
ON: forward one hour
OFF; back one hour
M£NU
■ TIMER №G SET
■ TV SETRP
■ C m SÍUP
<*AUT 0 REPEAT ONKlFf
-^SYSTEW SETUP
<-í-y-/ENTEf?:;MÉNLJ)
SYSTEM SETUP
I CLOCK SET
I LANOiAGBIDIOhMlANiSUE
I AUTO CLOCK ►ON OFF
*STAfffiARD TIME
-lOAYLiGHT SAVING TIME
^-s-y-yENTERyMENU)
DAYLK^T SAVING TIWE
ON
►OFF
<»ím^NTERíMENü)
When you set the Daylight Saving Time on the first Sunday
in April you set to “ON", and on the last Sunday in October
you set to “OFF”.
NOTES: • When shipped from factory, the DAYLIGHT
SAVING TIME option is set to OFF position.
• When the clock is not set. Daylight Saving
Time setting is not available.
• When there is no Daylight Saving Time in your
area, always select OFF position in step 3.
13