To set the off timer, Picture gontr0o a0austm, Buttm – Panasonic PV C923 User Manual
Page 19: Örf/tlmö, Ivicture, Igmmss 0, Brightness, Contrast, Color, Tint
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO SET THE OFF TIMER
This feature allows you to have the TVrt/CR turn off
automatically at a predetermined time. If you pro
gram the OFF TIMER once, the TV/VCR will
automatically turn off at the same time everyday.
EXAMPLE: Turning off the TV at 11:30 PM.
0№0TF msFR
■
ON
lmiáé OW52
Н,?0
нн
-FF!I
set
■
ÖRf/TlMÖ?
CANCEL
(+/-yENTEfyCANCELíMENü)
Press the MENU button.
Press the SETVTRACKING + or-
button to select the TV SETUP
option, then f^'ess the ENTER
buttm.
Press the SET/TRACKING + or -
button to select the ON/OFF
TIMER option, then press the
ENTER button.
Press the SET/TRACKING + or -
button to select the OFF TIMER
option, then press the ENTER
button.
MEr^U
t
TiMER REC SET
TV SETUP
OH SETUP
t+WENTERiWENU)
0№0FF TliWER
■ ON TlkiER
CH052
«0íí-FF!l
SET
I OFF ÍIMER
CANCEL
(+/-yENTE?UCANCELíMENü)
IV SETUP
g^fV-CHlP SET
-■
c
?4«
off
T
imer
iViCTURE
(V-y£«TER.1rlENy)
OKiOFF TIMER
I
ON T»,?Ef!
7:«]AM CH012
MON-FRI
SET
-YOFF T^i^ER
f \ 32:Q0«i! C
ancel
(■y-,WENTER/CANCEUIgENU)
4
Press the SET/TRACKING
+
or -
button to set the desired hour,
then press the ENTER button.
5
Press the SET/TRACKING
+
or -
button to set the desired minute,
then press the ENTER button.
6
Press the SET/TRACKING
+
or -
button to select the SET mode,
then press the MENU button
repeatedly to return to the normal
screen.
NOTES: * if a station being viewed
stops broadcasting, the
TV will automatically shut
itself off after 15 minutes.
• To cancel OFF TIMER, fol
low above steps 1-5, then
press the SET/TRACKING + or - button to select
the CANCEL. Press the MENU button to return to
the normal screen.
• To confirm the ON/OFF TIMER:
Press the PROGRAM button twice to indicate
the programs on the screen.
ON№F T№R
I OH
t
:
mer
7:Ü0AM CHÖ12
M-FRI
SET
<+W£RTER;CANCEL'MEHÜ)
PICTURE GONTR0O A0aUSTM^^
Picture controls are factory preset but you can adjust
them individually as follows;
To display the picture adjustment
screen, press the MENU button.
Press the SET/TRACKING + or -
button to select the TV SETUP
option, then press the ENTER
button.
Press the SET/TRACKING + or-
button to select the PICTURE
option, then press the ENTER
button.
MEMO
*
t
:
eíerrecs
£
t
-»TV SETUP
STCH SETUP
I AUTO REPEAT ONKiFF
■ SYSTEM SETUP
(+/-SNTER/MENU)
TV SETUP
I V-CHPSET
JLONyOFF THVER
-■^PICTLKÉ
í NTER í MEN ü ) №iGmMSS 0 (+/-íENTERyCANC£Lií^ENü) BRIGHTNESS Press the ENTER button until "BRIGHTNESS" appears on the pressed, the darker portions of the picture become lighter. CONTRAST Press the ENTER button until “CONTRAST” appears on the screen, picture. Pictures look sharpest In the daytime (bright light) by increasing the contrast. At night (dim light), the sharpest picture is obtained by NOTE: The CONTRAST default setting is set to maximum a! the factory. н,Н.^UTERíCAUGEUMERU) CORTñAST (+W£NTEEUCANGÉLiMEUü) COLOR Press the ENTER button until then press the SET/TRACKING + or of the picture. The control should be TINT Press the ENTER button until "TINT” the SET/TRACKING + or - button to adjust the tint of the picture. This Adjusting the tint for natural facial tone is the best method of obtaining accurate color reproduction of th® entire picture. SHARPNESS Press the ENTER button until the sharpness of the picture. CANCEL Pressing the CANCEL button while making picture NOTE: The On-screen display will disappear 6 seconds after finishing an adjustment or by pressing the MENU button three times. The settings can only be adjusted when they are displayed on the TV screen. 19
screen, then press the SET/
TRACKING + or - button to adjust
the brightness of the picture. When
the SET/TRACKING + button is
then press the SET/TRACKING + or
- button to adjust the contrast of the
reducing the contrast.
"COLOR” appears on the screen,
- button to adjust the color intensity
set when colors appear norma! in
intensity and briliianc®.
appears on the screen, then press
determines how accurately the
colors are reproduced by the TV.
"SHARPNESS” appears on the
screen, then press the SET/
TFiACKING + or - button to adjust
adjustments will return all adjustments to the factory
preset levels.