Panasonic OMNIVISION VHS PV-M2058 - Manual (Page 23)

[\^Check list before you begin.
Q All connections are made (see page 5).
0 Your Combination VCR is plugged in.
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature may be used to keep young
children from operating the Combination VCR.
Model PV-M2058 unit is shown here.
jM
I I ....... ■"'1
Icv о (o <>0^=1 Trap « o® /)
ВЕСОРОЯ1МЕ
Hold down REC/TIME on the
Combination VCR without a cassette
inserted for 7 seconds during Stop
mode.
To Cancel the VCR Lock feature,
with or without a cassette inserted,
hold down REC/TIME on the
Combination VCR for 7 seconds
again during Stop mode.
• VCR Lock mode is cancelled automatically
after about 24 hours as long as the clock is
set.
VCR LOCK ACTIVATED
VCH LOCK OFF
2
3
Model PV-M2058 remote
is shown here.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made,
1
Press ACTION to display the
MAIN MENU.
Press to select “VCR,”
and then press ACTION to
display the SET UP VCR screen.
SELECT ; A T Ч *■ KEY
SET [ACTION KEY
Press AT to select
“BEEPER,” and then press
► to select “ON” or “OFF.”
----------- SET UP VCH
REPEAT PLAY
NOISY CH BLUE BACKiON
TIME STAMP ;OFF
SELECT:* T KEY
SET :► KEY
END [ACTION KEY
Press ACTION twice to exit this screen.
23