Panasonic OMNIVISION VHS PV-M2058 - Manual (Page 18)

Timer Recording
‘Important: If the remote control POWER. CH AW , ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/TV and ADD/DLT
button does not work when pressed, press the TVA/CR button on the remote and try the button again.
Your Combination VCR can be set up to do
a recording while you are away or
otherwise occupied. Up to 8 programs can
be placed in memory. You can choose to
record one time, daily, or weekly,
|\^Check list before you begin.
Q All connections are made (see page 5).
Q Your Combination VCR is plugged in.
□ The clock Is set.
Q The tape is long enough.
r~i The record tab is in place.
Model PV-M2058 unit is shown here.
Indicator
1
5
6
Model PV-M2058 remote
is shown here.
1
Press PROG* to dispiay the
SET PROGRAM screen.
2 Press AT to seiect ‘TiMER
PROGRAM” and then press
► to dispiay the program
screen.
• If a program is already in memory,
press AT repeatedly, and then ►
select an unused program number.
............ SCT PROGRAM ...................
VCR Pius-i' PROGRAM
TIMER PROGRAM
SELECT : a ▼ KEY
SET ;► KEY
START STOP CH
to
rOBATN
CATEGORY: N/A
SELECT START DATE
SELECT;* Y KEY
SET :► KEY
END :PROG KEY
Press AT and ► to seiect and set one of the
foiiowing as the DATE:
1-31 = One time recording
DAILY = Same time MON - FRI
WEEKLY SUN-SAT = Same time once a week
Example
Today's
Date
^8—9 ............ '31— 1 —2..........
7 SELECTA/T Selection Order DAILY
(^WEEKLY........ WEEKLY WEEKLY _J
(SAT) (MON) (SUN)
4
Press AT and ► to select and set each of the
remaining items as follows.
Remaining Items:
• START time
• STOP time
• CH(annel) number, or LINE for outside source recording
• Category [N/A (not applicable), SPORTS, MOVIE, COMEDY,
MUSIC. DRAMA]
• Speed (SP, LP. SLP)
To Make Corrections
Repeatedly press ► or to move the cursor to the right or left,
and then make the correction.
O Press PROG to end the program.
• This screen appears for confirmation.
To Enter More Programs
Press AT and ► to select and set a
blank program number, and then repeat
steps 3 and 4.
P DT START STOP CH SPD
CANCELiADD/DLT KEY
SELECT 1-8;* T KEY
ENTER :► KEY
END :PROG KEY
6
Press PROG twice to exit this mode and return to
the normal screen.
• The PROGRAM TIMER indicator lights on the front panel.
* If you’re using a cable box, make sure that it is tuned to the desired
channel and the power is left on for timer recording.
Two minutes before the Timer Recording starts, ‘TIMER REC
WILL START SOON” will appear on-screen.
18