Cancel a timer recording, Replace program contents, Review or clear program contents – Panasonic OMNIVISION VHS PV-M2058 User Manual
Page 19: Recording is in progress), Recording is not in progress)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cancel a Timer Recording:
(Recording is in progress)
Model PV-M2058 unit is shown here.
STOP/EJECT PROGRAM TIMER
Indicator
Hold down STOP for a few seconds to cancel the Timer
Recording.
• Any future daily or weekly recordings will be performed as
programmed.
Replace Program Contents:
(Recording is not in progress)
1
Do steps 1 and 2 on previous
page. All currently set programs
will be displayed on-screen.
2
Press AT repeatedly to select
the desired program, and then
press ► to display the settings.
(See page 18.)
3
Press
AT
repeatedly to select,
and then press ► to enter
replacement information.
4
Press PROG three times to exit
this mode and return to the normal
TV screen.
P
DT START STOP
CH SPD
0-------------- ;---
-
2
a 10:00p12:00p125
SP
3 10
8:00p 9:00p
10 SP
4 SU
9:00p10:00p
L LP
SELECT 1-8:
a
¥ KEY
ENTER :► KEY
END :PR0Q KEY
b
J
c
TE I / START STOP
8 SAT 10:OOP 12:OOP 10
TipSATN
CATEGORY;SPORTS
¡¿¡¡EDBOEEaB™"
SELECT;A
t
KEY
SET
► KEY
END :PROG KEY
CBS
SP
Review or Clear Program Contents:
(Recording is not in progress)
a
Do steps 1 and 2 on previous
page. All currently set programs
will be displayed on-screen.
b
Press
AT
repeatedly to select
the desired program number.
C Press the ADD/DLT if you want to
clear the program.
d
Press PROG twice to exit this
mode and return to the normal TV
screen.
P DT START STOP
CH SPD
2 B 10:00p12:00p125
SP
3 10 8:00p 9:00p
10
SP
4 SU 9:00p10:00p
L
LP
CANCEL:ADD/DLT
KEY
SELECT 1-B:
a
¥ KEY
ENTER :► KEY
END :PflOG KEY
Model PV-M2058 remote
is shown here.
P DT START STOP CH SPD
2
0
10:00p12;00p125 SP
3 to B:OOp 9:OOp 10 SP
4 SU 9:00p10:00p L LP
SELECT 1-8: A ¥ KEY
ENTER :► KEY
END :PROG KEY
If “PLEASE PREPARE FOR TIMER REC” appears and/or the PROGRAM TIMER indicator flashes,
check that a cassette with record tab is loaded and the Combination VCR is in Stop mode.
If the start times of two programs overlap, the lower numbered program will have priority.
If the start time for a timer recording comes up during a normal recording or One Touch Recording
(page 17), the timer recording will not be performed.
If there is a power interruption of more than one minute, the recording may not be performed or
continue.
If “INCOMPLETE" appears after all items have been set, check all entries and make necessary
corrections.
19