Panasonic 8000 - Manual (Page 143)

Nortel Secure Router 8000 Series
Troubleshooting - VAS__________
4 NAT troubleshooting
This output information is the aging time (in seconds) of the establishment of the session
table.
display firewall servermap
display firewall servermap
Nat leaf display successfully.
Leaf Addr
BitConfig
DstIP
VpnID
Key Flag
Key Protocol/Pool ID
Key DstPort
Flag
Server Inner IP
Server Inner Port
Server Inner IP2
Server Inner Port2
Server Inner IP3
Server Inner Port3
Server ActionData
Aspf Aging T ime
Aspf Time Stamp
Aspf Temp SrcIP
Aspf App Protocol
Aspf IP Protocol
Aspf Client SrcPort
Aspf Client DstPort
Aspf Server SrcPort
Aspf Server DstPort
:0
:0x02417564
:0x00
:0x05010105 (5.1.1.5)
:0
:0x00
:0
:0x8000
:0x04010101 (4.1.1.1)
:0
:0x00000000 (0.0 .0.0)
:0
:0x00000000 (0.0 .0.0)
:0
:0xff^ffff^ff
:0
;4214
:0x00000000 (0.0.0.0)
:0
:0
:0
:0
:0
:0
Table 4-1 Description of the output information of the display firewall servermap command
Item Description
Leaf Addr The address of the leaf
BitConfig The configuration of the address of the bit
DstIP The destination IP address
VpnID The sequence number of VPN
Key Flag The type of the servermap table
0x40: specifies the servermap table that corresponds with the
NAT outbound configured with the no-pat mode
0x00: specifies the servermap table that corresponds with the
configured NAT server
Key Protocol / Pool
ID The number of the protocol/the index of the address pool
Key DstPort The destination port
Issue 01.01 (30 March 2009) Nortel Networks Inc. 4-13