Panasonic WV-CM143 - Manual (Page 20)

SPECIFICATIONS
Power Source:
Power Consumption:
CRT Size:
Actual Visual Size:
Camera Input:
Video Input:
Video Output:
Power Supply for Camera:
Camera Switching:
Sequential Switching :
Skip :
Auto Reset:
Resolution :
Sweep Linearity :
Sweep Distortion ■
Scanning Frequency:
Audio Input:
Audio Output :
Speaker Output:
Intercom / Sensor Input:
Alarm Output
Video Standby mode :
Standby mode:
Alarm time:
Timing :
Extension Adaptor Input:
Camera Extension Length
Ambient Operating Temperature
Dimension :
Weight :
120V AC 60 Hz
Approx, 110W
36.8 cm (14* diagonal)
33.5 cm (13“ diagonal)
1.0 V[p-p]/75 n, composite x 4 (BNC)
1.0 V[p-p]/75 n, composite x 1 (3NC)
1.0 V[p-p]/75 ii, composite x 1 (BNC)
Regulated current multiplex method (INPUT 1: selectable Camera Power On/Off)
Manual/Auto (sequence) with auto bypass
Approx. 1,2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 sec. (selectable with Set Up menu)
Automatically
Automatic reset circuit can function at 60 sec. after receiving the sensor signal.
(Auto reset on/off mode can be selected with set up menu)
More than 370 lines at center
Horizontal: 5% or less
Vertical: 5% or less
Horizontal: 15.734 kHz
Vertical: 59.94 Hz
-8 dB/Hi-z (pin-jack)
-10 dB/100 Q (pin-jack)
1.0 W
1 circuit par each camera
1 circuit
1 circuit
Approx. 1,5, 10, 20, 30, 40, 50, 50 sec. (selectable with Set Up menu)
Internal / External (electable with Set Up menu)
12-pin connector
Coaxial Maximum DC R/1000 ft. of
Cable Type Cable Length Inner Conductor
RG-59/U 200 m (660 ft.) Less than 30 i i
RG-6/U 500 m (1650 ft.) Less than 12 ii
The maximum DC-resistance of the coaxial cable between the cameras and video
monitor is 20
-10“C - +50°C (14°F - +122°F)
370 (W) X 354 (H) X 389 (D) mm [14-9/16"(W) x 13-1/2"(H) x 15-5/16"(D)]
Approx. 11 kg (2.4 lbs.)
Weights and dimensions shown are approximate.
Specifications are subject to change without notice.
-18-