Remote control for video monitor – Panasonic WV-CM143 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Remote Control for Video Monitor

Notes:

1, When the alarm signal operation will be made in this

system Connect the Time Date Generator according to
the need.

2. When the alarm signal operation will be made in this

system, the alarm signal should be supplied from the

Time Lapse VTR.

Refer to the Operating Instructions of Time Lapse VTR

for details.

VTR mode

Setting Position

Monitor (A)

Monitor (B)

Recording

CAMERA

EXT

Playback

EXT

3. Input Selection Switch of this monitor should be set as

shown below.

4. The Color Monitor WV-CM143 (B) can not connect to

the camera.

5. The Color Monitor WV-CM143 (A) does not allow the

Color Monitor WV-CM143 (B) to recover into the
sequential mode,

6. Refer to the Operating Instructions of Time Lapse VTR

for the recording detail.

-17-