Delayed transmission – Panasonic KXF1100 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Delayed transmission
8. Mymced Operations
The unit can send fax documents automatically at a
cost calling hours offered your telephone company.
Delayed transmission can be programmed up to 24
specific time. This allows you to take advantage of low-
hours in advance.
1
2
3
4
5
Insert the documents FACE DOWN.
Press [MENU].
SYSTEM SET UP
Press then press [
2
]
DELAYED XMT
Press ( START/SET).
MODE^OFF
A Y ]
Press (3 Of (3 to select “ON”.
MODE=ON
A Y
• If this feature is not required, select
“OFF”.
6
7
8
9
Press START/SET .
NO. ^
Enter the phone number by using one-
touch dialing, speed dialing, full number
dialing or electronic telephone directory.
Press START/SET .
TIME=12;00AM
Enter the transmission start time.
Example: 11:00PM
Press [T][i]00, then press
to select PM.
To select AM, press
10
11
Press [START/SET],
Press [MENU],
•When the programmed time has come,
the unit will automatically start
transmission.
Note:
• If there is no answer or the line is busy, the unit
will automatically redial the number up to 5
times.
•You can receive, transmit and copy documents
while delayed transmission is set.
• If the programmed start time has passed during
a power failure, delayed transmission will be
attempted soon after power is restored.
•When transmit polling (see page 31) is set to
ON, delayed transmission is not available.
32