Setting the date and time, Setting your logo, Setting the date and time setting your logo – Panasonic KXF1100 User Manual

Page 12: Initial preparation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2. Initial Preparation

Before using your unit, program the foiiowing:
•Current date and time
•Your logo
•Your facsimile telephone number

This information will be printed on the top of each page transmitted from your unit.

Setting the date and time

Press [MENU],

SYSTEM SET UP

SET DATE & TIME

Press (^, then [[].

Press [START/SET].

Enter the correct month/day/year/hour/minute

by selecting each 2 digits.

Then press @ for AM or press @ for PM.

Example: Aug. 10 1995, 3:00PM

Press

0000

00,

then press 0 for PM.

Press [START/SET].

Press [MENU].

(STOP)

Note;

•When you make a mistake while programming,

press [ STOP 1 then make the corrections.

•The accuracy of the clock will be approximately

±60 seconds a month.

Setting your logo

Usually the logo is a company, division or personal name in an abbreviated form.

Press [MENU].

SYSTEM SET UP

Press [«], then [0 [0.

YOUR LOGO

Press [START/SET].

LOGO=

Enter your logo up to 30 characters.
(The preset logo will be cleared.)

• Refer to the instructions on page 13.

Press [STA^/SEf].

Press [MENU].