Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 98)

98
To simultaneously measure a distance, record the measurement
data and the selected point code.
To record the measurement data and the selected
point code.
The selected point code will be recorded
everytime
or are pressed.
The point code will be recorded together with the measurement
data only if defined so in the REC- Mask. Check your REC-Mask to
make sure that the point code belongs to your REC-Mask.
Or
Meas\ Measurement & Record
Point Id : 112
Point Code : 12
MC
F1
ALL
F3
REC
F1
ALL
F3
REC