Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 66)

66
F3
JSTCK
F1
CONT
To start the compass mode. You need a compass to use this
search mode. Refer to the RCS User Manual for more information.
Starts the quick prism search PowerSearch (only available on
instruments with optional PowerSearch module)
To position the motorized instruments to the prism with the cursor
keys (joystick mode). The left/right cursor keys move the
instrument horizontally.
The up/down cursor keys move the instrument vertically. The
instrument can be moved faster by pressing a cursor key twice
(three different speeds). It can be stopped by pressing any other
cursor key.
Confirming with starts to search for the prism and locks if the
prism has been found.
To position the instrument to the prism by entering angle values.
Motorized instruments turn by the corresponding values.
Confirming with starts to search for the prism and locks ifthe
prism has been found.
F1
COMPS
F2
PS
F1
CONT
F2
Hz/V