Dillon EDXtreme (Old) - Manual (Page 47)

EDxtreme User Instructions 47
11.2 Communicator Specifications
Enclosure: Designed to NEMA 3 / IP44 with optional sleeve. Suitable for protected outdoor use.
Instrument size: 9.0 x 4.6 x 1.8 inch (228 x 117 x 45mm).
Accuracy: Not applicable. Only sends and receives digital information.
Display: 128 x 64 dot-graphic LCD display can show full readings up to 5 instruments.
Battery life: 60 hours wireline, 20 hours radio using four
AA alkaline batteries under typical use.
Operating temperature: -4° F to 140° F (-20° to 60° C)
Connectors: Sealed connectors may be used for serial communications and wired connection to an
EDxtreme dynamometer.
RS-232 communication: Print or extract data easily. Continuous output can drive a scoreboard. Configurable
poll character.
Included with remote: Carry case and batteries.
Accessories: Rubberized case protector sleeve, Remote wall mount bracket, Serial and remote cable
assemblies.
11.3 Radio Specifications
FCC Certified: For unlicensed low power devices. No radio licensing or permits required for normal
operation.* (In the US and Canada. Check local ordinances in other countries.)
Frequency: 2.4 GHz spread-spectrum operates between 2.402 – 2.478 GHz. Continuously and
automatically changes frequencies many times per second for consistent, reliable
communications.
Output Level: 10 mW (20 dBm)
Display Update Rate: 2 times per second with single dynamometer. Multi-instrument networks result in
reduced updates.
Number of networks: 63 remotes can operate independently in the same airspace with unique channels.
Number of links remote can control: Up to 15 addresses are available per network channel.
Configuration: Address and Network channels are front-panel configurable.
Antenna: Integral antenna.
Range: Open-air – Up to 300 feet, line-of-sight.
Indoors – Dependent upon installation site with 150 feet common.