Dillon EDXtreme (Old) - Manual (Page 23)

EDxtreme User Instructions 23
5 Configuration
The configuration menu is a group of settings that may be password protected if
desired to prevent operators from making significant system changes. It is used to
configure the following:
l radio network
l
resolution
l
communication ports
l
power up display mode
l
units of measure
l
power management
l
password management
l
system default reset
To access the configuration menu, press the Config soft key shown in Figure 5.1 .
Figure 5.1 Accessing Config soft key and menu
The display prompts for a password. See Figure 5.2 .
Figure 5.2 Password screen
Use the Num keys to enter the first character of the password and the Adv key to move
to the next character. When you are done press the Enter key and the soft keys shown
in Figure
5.3 become available.
The default password is “0”. If the password has been changed and forgotten, contact
your Dillon distributor for assistance.