BendixKing KHF 990 - Manual (Page 189)

ters depends on the address type. The second lines acts as a win-
dow into a list of parameters that must be entered. After the operator
makes an entry and presses the ENT key or moves the cursor, the
next parameter to be changed is displayed.
CAUTION The address type field requires special handling to
prevent accidental changes of address types. Changes to the
address type are accepted only if the ENT key is pressed. If the
address type is changed and the cursor is moved off of the
address type field, the address type will revert back to the origi-
nal type.
The address types are:
SELF Address this radio will respond to.
SINGLE Address for a single ALE station.
StarNET Star network of addresses that must be
programmed into all stations prior to using it.
GROUP Group of addresses put together after the
database is entered.
ALE Address Program Page (ADDR Sub-Page)
All address types are programmed on this page. The database can
hold up to 20 self address and 100 other addresses.
1. From the system program page, select “Address” on the bottom
line.
2. Press the ENT key. The ALE address sub-page is displayed.
Programming a Self Address
The radio can store up to 20 different self addresses.
1. Place the cursor over the address type field, this is the first
cursorable field on the top line of the display.
2. Select “Self”
3. Press the ENT key. The cursor will move over the address index
(number in upper right corner of display.
4. Select the index of the self address to modify.
5. Press the ENT key. The cursor will move over the address field
Services
12-9 KHF 950/990 Pilots Guide
Rev. 0
Dec/96