Emailing from labquest – Vernier LabQuest 2 User Manual
Page 41
37
VI. EMAILING FROM LABQUEST
If LabQuest is connected to a network with Internet access, you can email your data file, graph,
text file, or screenshot.
To set this up, follow these instructions:
1. Connect LabQuest to a network with Internet access. For detailed instructions, see
Note: A LabQuest Network (
) does not have Internet access. You will need
to join an existing network with Internet.
2. Launch the Connections App from the Home screen.
3. Tap the Email settings gear to open the Email Configuration dialog box.
Note: If you are not able to access the Email Configuration dialog box, see
Access to the Connections Setup
4. Verify email is enabled (On).
5. Enter your outgoing email server information, as well as your username and password, and
tap OK. If you don’t know your server information, check with your technology specialist.
Note: To test your email settings, tap Test. You should receive a message to your email
address stating that you have successfully configured the mailer on your LabQuest. To clear
existing setting, tap Reset.
For more information on setting up Gmail accounts, see: