Vernier LabQuest 2 - Manual (Page 37)

Using LabQuest 2 with a Mobile Device
33
2. Within the Advanced Preferences dialog box, tap
the Network tab.
3. Select lockdown-mode and then tap Edit.
4. Select the desired key value.
• Full access to all settings (Value = 0)
Use this setting when you are configuring your
Connections settings.
• Access to network settings only (Value = 1)
Use this setting when you what to restrict access
to settings but want to allow access to different
networks.
• Restrict access to all settings (Value = 2)
Use this setting when you want to restrict access to all settings, including the network
settings.
Note: Changes to the Connections main screen will not show if the lockdown mode is
changed while the Connections App is running. Tap
to close the application, then launch
the Connections App again.