Rane TTM 57SL Manual for Serato Scratch Live 2.44 - Manual (Page 55)

RANE TTM 57SL MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4 55
Appendix
MIC LEVEL
MIC/LINE INPUT
LOW HIGH
MIC ON
EQ
OL
AUX IN
AUX IN
RETURN
FlexFX ADC
MAIN
LEVEL
MAIN OUT
AUX OUT
AUX
LEVEL
BOOTH OUT
BOOTH
LEVEL
HEADPHONE OUTPUTS
1/4"
3.5mm
SEND
FlexFX
DAC
PHONES
DAC
DAC
CUE OUT
FlexFX OUT
DIGITAL 1 L/R
DIGITAL 2 L/R
RECORD 1 L/R
RECORD 2 L/R
MIX OUT L/R
AUX INPUT L/R
DSP
USB
RIAA
ANALOG 1
PHONO / LINE
ADC ANALOG 1 L/R
RIAA
ANALOG 2
PHONO / LINE
ADC ANALOG 2 L/R
RIAA
ANALOG 3
PHONO / LINE
ADC ANALOG 3 L/R
RIAA
ANALOG 4
PHONO / LINE
ADC ANALOG 4 L/R
Analog Diagram
Simplified block diagram of the analog inputs around the DSP. Only one channel is shown.
Footswitch Diagram
Rane does not manufacture or distribute
the optional foot switch. The foot switch
needs to be a passive pull-down device
capable of grounding the TIP, RING or TIP
and RING to get the three possible states.
Good choices are the DigiTech FS300 or
GNXFC. To the right is a basic diagram
of a 3-switch foot switch. Three buttons
gives the most flexibility, but you can also
use one or two button footswitches.
To
configure Scratch Live to work with 1,
2 or 3 button footswitches, see “Foot
switch Type” on page 34.
S1
S2
S3
TIP
SLEEVE
RING