Echo effects control assignments, Echo effects controls, Phaser frequency / flanger delay / tap bpm – Rane TTM 57SL Manual for Serato Scratch Live 2.44 User Manual
Page 45: Multiplier, Feedback / depth, Wet / dry mix, Echo effect differences, Hp echo effect differences
P1
Phaser Frequency / Flanger
Delay / Tap BPM
The Phaser’s primary function of
P1
(indicator off) is filter frequency, starting
at 722 Hz and adjusts from 31.5 Hz to 16
kHz (9 octaves). The full sweep of the filter
is reached in 1
1
/
3
rotations of
P1.
The Flanger’s primary function of
P1
(indicator off) is Base Delay, adjustable
from 0 to 11.6 milliseconds. The Base
Delay sets the high frequency point of the
sweep. The Depth control (
P2) sets the
range of the swept comb filter.
If the track has a BPM tag, the sweep
matches it and a lock icon appears in the
BPM section. To manually set the sweep
BPM, tap
P1 to the beat. The default BPM
is 120. Tapping
P1 can set it from 24 to
480 with a resolution of 0.1 BPM. A single
Tap of
P1 resyncs the sweep to BPM.
J1
Multiplier
The BPM Multiplier is selected with
J1,
toggling between transform operation
and BPM multiplier. If the green mode
indicator is on,
J1 may adjust the
multiplier to 16, 8, 4, 2, 1, ¾, ½, or ¼.
P2
Feedback / Depth
Feedback is the primary function of
P2
(indicator off) controlling the amount of
phased or delayed signal fed back to the
input, increasing “fatness.” Minimum to
maximum is 1
1
/
3
rotations of
P2.
Depth is adjusted using the second
function of
P2 (green indicator on). Depth
sets how far the sweep of the LFO (low
frequency oscillator) modulates the
Frequency (Phaser) or Delay (Flanger) as
set by
P1. Phaser Depth is adjustable
from 0 to ±4.5 octaves, and Delay Depth
is adjustable from 0 to 11.6 ms. The full
range is reached in 1
1
/
3
rotations of
P2.
With Depth at minimum, the LFO ceases
to have any effect, and
P1 becomes a
manual sweep control.
J2
Wet / Dry Mix
Pressing
J2 toggles between transform
operation (indicator off) and Wet / Dry
control (indicator on). The phaser / flanger
default is 100% wet.
J2 has the same
operation on all effects.
Echo Effects Control
Assignments
If the track has a BPM tag, the Echo
BPM is automatically set and a lock icon
appears in the Echo section. To manually
set the BPM of the Echo, tap
P1 (or the
footswitch) to the beat.
Echo Effect Differences
• Feedback starts at 70% and is
adjustable from 0% to 94%.
• Feedback generates as long as it is
inserted.
•
P2 has no second function in the Echo
Effect.
GROUP
DECK
P1
P2
J1
B1
B2
1
2
B3
B4
B5
B6
J2
PROCESSOR 1
DELAY
FEEDBACK
HP ECHO FREQ
TAP BPM
PROCESSOR 2
MULTIPLIER
PGM 1
PGM 2
AUX B
MAIN
ON
ON
INSERT POINT
CUE
EFFECT
ALL WET
MORE
DRY
ALL DRY
MORE
WET
1
3/4
1/4
8
2
1/2
16
4
P1
•
Delay
B1
PGM 1
•
B2
PGM 2
•
B3
AUX
•
B4
MAIN
•
PGM 1
PGM 2
AUX
MAIN
B6
•
Delay is set by BPM tag.
Tap
P1
•
for manual BPM.
•
P2
Feedback
range = 0 to 94%
Echo starts to
build when effect
is inserted
on
B1
•
B2
•
B3
•
B4
•
HP Echo Effect Differences
• Each delay cycle repeatedly runs
through a second-order High Pass Filter
having a set resonance of 0.7.
• Filter Cutoff Frequency is adjusted
with the second function of
P2 (green
indicator on), adjustable from 31.5 Hz to
16 kHz (9 octaves). The full sweep of the
filter is reached in 1
1
/
3
rotations.
B1
PGM 1
•
B2
PGM 2
•
B3
AUX
•
B4
MAIN
•
PGM 1
PGM 2
AUX
MAIN
B6
•
Delay is set by BPM tag.
Tap
P1
•
for manual BPM.
•
P2
Feedback
range = 0 to 94%
Echo starts to
build when effect
is inserted
on
B1
•
B2
•
B3
•
B4
•
P1
•
Delay
P2
•
Frequency
HP Filter
RANE TTM 57SL MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4
45