Rane TTM 57SL Manual for Serato Scratch Live 2.44 - Manual (Page 39)

RANE TTM 57SL MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4 39
(Group B1) General Controls (Custom Group 1)
This is the first group shown below with default commands when you first start Scratch Live. These give you basic playback controls
and up to 3 cue points per Virtual Deck. The orange left arrows (r) control the left Virtual Deck and the blue right arrows (R) control the
right Virtual Deck. The joysticks default to transform mode (LEDs off). Press the joystick in (LED on) to activate its controls as shown.
Joystick left to jump to the
temporary point on the
right Deck.
Jump to cue points
on the right Deck.
Control looping from
the footswitch.
Jump to cue points
on the left Deck.
Hold the joystick down and
press a B button to set a
cue point on the left Deck.
Scroll through your crates and library. Push to load track on left Deck. Push to load track on right Deck.
Joystick right to
‘Double’: Copy the
track from the left
Deck to the right
Deck.
Joystick left to
‘Double’: Copy the
track from the right
Deck to the left
Deck.
Hold the joystick
up to play the track
backwards
momentarily then
release to jump
ahead with timing
intact.
(Group B2) Library (Custom Group 2)
In this second custom group, many of the functions can be applied to either of the Virtual Decks. To select which of the Virtual Decks a
given effect is applied to, press the mixer’s DECK button. The LED next to the button indicates which of the Virtual Decks the software
function applies.
Push to load.
Hold the joystick
up to play the track
backwards
momentarily then
release to jump
ahead with timing
intact.
< = previous loop.
> = next loop.
Joystick right to
‘Double’: Copy the
track from the left
Deck to the right
Deck.
Joystick left to ‘Double’:
Copy the track from the
right Deck to the left Deck.
Loop On / Off (toggle) Control looping from
the footswitch.
Jump to Cue
points.
Hold the joystick down and
press a B button to set a
cue point.
Scroll through your crates and library. Push to undo the last action.
(Group B3) Playback
To access this group, press the GROUP button on the mixer, then press B3. This group contains all the software functions required for
mixing in int mode. To select which of the Virtual Decks a given effect is applied to, press the mixer’s DECK button. The LED next to
the button indicates which of the Virtual Decks the software function applies.
Hold the joystick
up to play the track
backwards
momentarily then
release to jump
ahead with timing
intact.
<< = rewind.
>> = fast forward.
Joystick waveform
zoom.
up = zoom in.
down = zoom out.
Control looping from
the footswitch.
Play /
Pause.
Play the track
reverse from the
current position.
Scroll through your crates and library. Push to undo the last action. Nudge forward or back.
Push (LED on) and
turn to quickly
shuttle through the
track.
Set temp
cue point.
Hold to play from
temp cue. Release
returns to temp cue.
Playback modes.