beautypg.com

WEATHER GUARD Model 286-3-01 EZ-GLIDE® Drop Down Kit, High-Roof, Driver Side User Manual

Page 11

background image

(3) 3/8" Flat
Washer

5/16-18 x 4-1/2"
Hex Hd. Bolt

(A)

STEP 10
Insert Aluminum Bushing (A) into the Rear
Cross-Member (B). Attach back of Cylinder (C)
to crossmember by installing 5/16-18 x 4-1/2"
Fastener.

NOTE: After installing Bolt, apply

Loctite 290 to threads, then install the nut.

(C)

5/16-18 Nylon
Lock Nut

(B)

CYLINDER INSTALLATION

Cotter Pin

1" Clevis Pin

NOTE: Turn the Flow Control
counter clockwise to release
pressure. Adjust Flow Con-
trol Screw Per Instruction
Decal On Handle Tube after
final assembly and installa-
tion.

STEP 11
Attach front of Cylinder as shown. Bend over
Cotter Pin after inserting it through Clevis Pin.

NOTE: Vehicle mounting
not shown for clarity