WEATHER GUARD Model 2510F Universal Roof-top Mounting Kit - Manual (Page 2)

© 2014 Werner Co. Part No. 24-0329 REV. A ECN 5469 07/14
INSTALLATION INSTRUCTIONS
1. Discard the mounting feet included with the ladder rack and replace with the feet from the 2510F
mounting kit. The M8 stainless steel mounting bolts are included for installation to a Ford Transit van.
2. Using the spacing guideline table, place the two mounting feet the distance apart using the spacing in
the table as measured from the outside of each mounting foot.
3. For Model 218-3, Model 223-3-01, or Model 224-3-01 roof racks, loosely bolt the mounting feet to the
cross-member as described in the instruction manual that came with the rack.
4. For 280 and 285 racks, mark the location of the obrounds on the cross-member and drill holes through
cross-member.
5. On some vans, such as the Nissan NV, it may be necessary to mount the curved bracket facing out-
ward to better align to roof-top mounting holes.
Replace the four mounting feet included in the Model 280-3-01
or Model 285-3-01 ladder racks with the mounting feet in the
Model 2510F Mounting kit. There are two mounting feet in each
Model 2510F mounting kit.
Replace the four mounting feet supplied with the Model 223-3-01 or Model 224-3-01 ladder
racks or the Model 225-3 accessory cross-member with the mounting feet in the Model 2510F
Mounting kit. There are two mounting feet in each Model 2510F mounting kit.
Replace the four mounting feet included in the Model 218-3 ladder rack or the
Model 222-3 accessory cross-member with the mounting feet in the Model 2510F
Mounting kit. There are two mounting feet in each Model 2510F mounting kit.