WEATHER GUARD Model QDKSBP01 Quick Draw Kit, Lo-Side, Passenger Side - Manual (Page 9)

LO SIDE BOX
USER INSTRUCTIONS
Page 9
ENGLISH
i. Secure the metal cover with the (2) screws provided and replace
the plastic top cover and secure with the screw removed in step #1.
See Figure 12.
figure 12
h. Insert the new lock with switch and secure in place using retaining
clip and gasket as shown in Figures 10 & 11. Connect lock 2-pin
Connector with the wire harness 2-pin connector, and fully tighten
down bracket assembly.
figure 11 figure 10