WEATHER GUARD Model 9893-7-01 Three Hook Cord Tool Holder - Manual

1
INSTALLATION MANUAL
End Panel Mounted Accessory
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
WWW.WEATHERGUARD.COM
VAN STORAGE SOLUTIONS
FOR THE WAY YOU WORK TM
*24-0296* Part No. 24-0296 03/12
• Plan the placement of your accessories before installing them, some accessories may be easier to
install before mounting shelving into the van.
• Install panel mounted accessories before shelf mounted accessories.
• Weather Guard
® rapid Mount™ end Panels have pre-punched mounting holes simplifying installation.
TOOLS REQUIRED BOLT KIT
DESCRIPTION QTY.
Mounting Bolt, 1/4-20 x 1/2"
round head, Phillips
4
1/4-20 Nut 4
Washer, Flat 1/4" 4
• 7/16 Open or Box end wrench
• Phillips Screwdriver
INSTALLATION TIME
approximate installation time: 5 minutes
per unit depending on van equipment
installation experience .
PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION)
STEP 1. Position accessory over mounting
holes, taking into account clearances to access
and use the accessory.
STEP 2. use four 1/4-20 x 1/2" bolts and 1/4-
20 nuts to secure accessory to end panel with
the nut on the accessory side.
STEP 3. tighten to 18 in-lbs.
INSTALLATION STEPS
Be safe - always wear protective eye-
wear to keep debris out of your eyes
when installing Weather Guard ®
Van Products.
CAUTION
Representative of End Panel
Mounted Accessories