WEATHER GUARD Model 8230-3-01 Welded Stack Unit, 30 in x 36 in x 12 in - Manual

INSTALLATION INSTRUCTIONS
All-Welded Shelf Unit - Model 8234, 8230, 8222
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
Rev. C 1/01 Part No. 24-0119
PARTS LIST
• 1- Welded Shelf Unit
TOOLS REQUIRED
• 7/16" Open or Box End Wrench [2]
• Electric Drill with 5/16" Drill Bit
• 5/16" Nut Driver
• 9/16" Open or Box End Wrench
BOLT KIT
The following Bolt Kit is provided
with each unit. Check this bolt kit to
be sure the following parts are in-
cluded:
8222
8230 8234
Description
32-8233 32-0153
2 0 1-1/4" x 12" Mounting Strap
4 0 1/4-20 x 5/8" Hex Hd. Bolt
8 4 1/4-20 Nylon Lock Nut
4 4 1/4-20 x 1-1/4" Hex Hd. Bolt
2 0 12-14 x 3/4" Tek Screw
12 0 1/4" Flat Washer
1 0 Installation Tool
1 0 1/4-20 Blind Fastener
1 0 1/4" Lock Washer
1 0 1/4-20 x 2-1/4" Blk. Ox. Bolt
2 0 Mounting Angle
1/4-20 Nut
1/4" Flat
Washer
5/16" Hole
Mounting Strap
Mounting Angle
1/4-20 x 1-1/4"
Hex Head Bolt
1/4-20 x 5/8"
Hex Head Bolt
1/4" Flat Washer
1/4-20 Nylon
Lock Nut
1/4-20 x 5/8"
Hex Head Bolt
1/4-20 Nylon
Lock Nut
Approximate Installation Time:
18 min. per unit (0.3hrs.)
depending on van equipment
installation experience.