WEATHER GUARD Model QDKSBP01 Quick Draw Kit, Lo-Side, Passenger Side - Manual (Page 13)

LO SIDE BOX
USER INSTRUCTIONS
Page 13
ENGLISH
c. To pair multiple FOBs to QuickDraw system module:
1. Fob 1: perform steps 1-4 above for first FOB
2. Fob 2 through 10: perform same steps 1-4 within 30 seconds of
each other until all FOBs have been paired.
3. System will automatically exit learning mode within 30 seconds
NOTE: FOB memory is cleared every time the system begins
learning mode. In this case, all corresponding FOBs will need to
be re-paired by following sequence above.
d. Additional features
The FOB buttons can be programmed to work in one of three ways:
1. Single press - Press FOB button once to open desired box
2. Double click - Press FOB button quickly twice
3. 3 second hold - Press and hold FOB button for 3 seconds
To program 1-3 FOBs, make sure DIP switches are in the following
orientation:
Dip Positions
Button
Operation Options 1 2 3 4
Single press
(factory
settings)
OFF OFF ON OFF
Double-click ON OFF ON OFF
3 second hold OFF ON ON OFF
figure 16
3x