WEATHER GUARD Model QDKSBP01 Quick Draw Kit, Lo-Side, Passenger Side - Manual (Page 2)

Page 2
ENGLISH
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS
AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS
PRODUCT.
CAUTION
Be safe - always wear protective eye wear to keep debris out of your eyes when
installing WEATHER GUARD ® Truck Products
WARNING
Prior to drilling, check under vehicle for fuel, tanks, fuel lines, brake lines, electric wires,
etc. To avoid cutting or puncturing them. Do not use Blind Fasteners in these areas.
Tools Needed
• NEEDLE NOSE PLIERS
• PHILLIPS HEAD & STANDARD HEAD SCREWDRIVER
• WIRE STRIPPER
• 5/16” WRENCH OR SOCKET
• POWER DRILL
Installation Kit Includes:
WEATHER GUARD EXTREME PROTECTION ® LOCK
QTY. 1 -CLIP, GASKET AND KEYS INCLUDE QTY. 1
WIRE HARNESS - 2 AVAILABLE:
DRIVER SIDE HARNESS (QDKSBD01 KIT) QTY. 1
PASSENGER SIDE HARNESS (QDKSBP01 KIT) QTY. 1
ACTUATOR, LATCH, LINKAGE & BRACKET ASSEMBLY QTY. 1
ACTUATOR ASSEMBLY COVER QTY. 1
SELF TAPPING MOUNTING SCREWS (#8-18 x 1/2”) QTY. 2
ADHESIVE SQUARES QTY. 8
WIRE TIES QTY. 8