WEATHER GUARD Model QDKSBP01 Quick Draw Kit, Lo-Side, Passenger Side - Manual (Page 10)

Page 10
ENGLISH
V. System Check
Testing the QuickDraw Remote (FOB)
The QuickDraw starter kit comes complete with 1 FOB, which is
pre-programmed to the System module included. If additional FOBs
are desired for the system, please see “FOB programming”.
a. Test 1: Proximity hands-free operation
1. Bring the QuickDraw remote into range (within 5ft of box).
2. Ensure truck box lid is closed and all push button locks are
in locked position.
3. Test one of the QuickDraw proximity function by depressing
and holding push button lock for approximately 2 seconds.
• If truck box opens correctly, proceed to test push the
other button lock. If both push button locks work correctly,
proceed with test 2.
• If truck box does not open correctly, double-check all
electrical connections and repeat testing.
b. Test 2: Push Button Remote Operation
1. Ensure truck box lid is closed and all push button locks are
in locked position, and QuickDraw FOB is within 100 ft of the
truck.
2. Test QuickDraw push button remote function
by depressing and holding button 1.
• If truck box opens correctly, proceed with
final installation steps. (Buttons 2 and 3
can be programmed for optional lo-side
QuickDraw Boxes)
• If truck box does not open correctly, double-check all
electrical connections and repeat testing.
VI. final Installation
Use velcro to attach the system module to the saddle box and use
wire ties and adhesive squares to hold the wire harness in place
where needed.