WEATHER GUARD Model QDKSBP01 Quick Draw Kit, Lo-Side, Passenger Side - Manual (Page 4)

Page 4
ENGLISH
fCC:W99pI01, W99pI02 IC:8296A-pI01;8296A-pI02
This device complies with part 15 of the FCC Rules and Canada
license-exempt Rss-210 standard.
Operation is subject to the following two conditions
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
WARNING! SAfETY fIRST
The following safety warning must be observed at all times:
Due to the complexity of this system, installation of this product must only be performed
by an authorized Weather Guard dealer.
IMpORTANT INfORMATION
Congratulations on purchasing your QuickDraw™ Keyless Entry System. Due to the
complexity of this system, it must be installed by an authorized dealer only. Installation
of this product by anyone other than an authorized dealer voids the warranty.
By carefully reading this Owner’s Manual prior to using your system, you will maximize
the use of this system and its features. You can print additional or replacement copies of
this manual by accessing our web site at www.weatherguard.com.
I. System Maintenance
The system requires no specific maintenance. Your QuickDraw
remote is powered by a small coin cell lightweight 3-volt lithium
battery (CR2032) that lasts approximately 3 years under normal
use. When the battery begins to weaken, the operating range is
reduced.