Satellite Taurus - Manual (Page 6)

PN# 18680 REV. G 6 5-17-11
11. Fasten coat hook: Drill dimple with 3/16” drill bit. Drill only through first layer. Fasten coat hook
#10891 (1) to the door using expanding rivets #18755 (1). (See fig. A)
A B
12. Fasten Mirror: Drill out the (2) Dimple with 3/16” drill bit. Drilling only through first layer. Fasten with
Rivets #66 Alum #11027 (2). (See fig. B) Remove protective film from Mirror.
13. Fasten Door Handle: Drill dimple with 3/16” drill bit. Drilling only through first layer. Fasten the
Handle, door #16807 (1) to the door with Expanding Rivets, #18755 (2).
(See fig. C)
C D
14. Drill out the (3) dimples in the recess area for gender indicator with a 1/4” drill bit. Attach gender
label sticker in recess area. Poke hole through sticker with a Phillips screwdriver. Fasten gender
cover with Rivet, Expanding #18755 (1) Thru hole in Cover, Gender #18807 (1) a Washer, 3/16"
#11315 (1) and Rivet into center hole in Gender Indicator Recess Location. The washer under the
cover will prevent cover from rubbing on Gender Label. Install plastic pine tree Rivet #16804 in
remaining hole. (See fig. D)
15. Install door latch in pocket on the inside of the door. The door latch must fit securely, but must move
with some resistance.