Satellite Taurus - Manual (Page 4)

PN# 18680 REV. G 4 5-17-11
1. Place base on floor and tank in base. 2. Assemble toilet seat to tank.
3. Remove shipping screw from bottom 4. Retrieve (2) panels and lean
of door and open door to 90 degrees. them against the door.
.
5. Rivet right panel to door jamb- fasten top, center and bottom using Rivet Expanding #18755 (30) and
repeat on left side. This will hold parts together. (Note: The panels overlap on the front. Also you can
finish riveting remaining holes at this time.)
6. Fasten the right wall, back wall and post together. Rivet the top hole with Rivet Expanding #18755 first.
Then finish riveting remaining holes with Rivet Expanding #18755 (30). Repeat the same step on the
left side. (Note: The rear panel needs to overlap the left side panel and the right side panel needs to
overlap the rear panel on the rear of the toilet.)