Canon GL2 User Manual

Page 49

Recor

ding

2. Press the PHOTO button fully down to take the still image

• The camcorder takes the image immediately, and then records the “photo” to the tape for

approximately 6 seconds. During this time the camcorder also records the sound, and the
display shows the still image.

• A counter display appears, and counts up as the camcorder records the still image.

disappears from the display.

• The camcorder returns to record pause mode.

Notes:

• The camcorder automatically returns to record pause mode after recording a still image for

approximately 6 seconds. If you turn the POWER switch to OFF during that time, the camcorder
will respond only after recording is complete.

• The wireless controller’s PHOTO button has no half-way setting. Press the button fully and the

camcorder immediately.