Canon GL2 User Manual
Page 121
121
E
Using a Memor
y Car
d
2
Card Jump Function
You can jump from the current image to the desired image of unadjacent image number without
displaying the images one by one.
The numbers shown in the upper right corner in CARD PLAY (VCR) mode indicate the image
number of the current still image and the total number of still images on the memory card.
With a still image in the display, press and hold the CARD +/– button.
• Press the + button to jump forwards through the images and press the – button to jump
backwards.
• The image number moves forwards or backwards.
• When you release the button, the still image to which the currently shown number is assigned,
appears in the display.
2
Slide Show
With a still image in the display, press the MIX/SLIDE SHOW button.
• The still images are played back one after another.
To stop the slide show, press the MIX/SLIDE SHOW button.
• The slide show starts or stops each time you press the SLIDE SHOW button.
2 Index Screen
Up to 6 images appear at once so you can search quickly for an image.
1. With a still image in the display, press
the INDEX SCREEN button.
• Up to 6 images appear in the display.
2. Select a still image by pressing the SELECT dial or the CARD +/– buttons.
• A red frame appears around the selected image.
• Pull the SELECT dial up to move to the next image and down to move to the previous image.
• Pulling the SELECT dial up at the last image displays the next index screen. Pulling the SELECT
dial down at the first image displays the previous index screen.
• You can also use the CARD +/– button to switch index screen. Press the CARD – button to
display the previous index screen and the CARD + button to display the next index screen.
3. Press the INDEX SCREEN button with the frame on the selected image.
• The selected image appears in full size of the display.
+
PLAY
(VCR)
CARD
+
PLAY
(VCR)
CARD
+
PLAY
(VCR)
CARD
INDEX 100–0143
SEL. INDEXEND
1488
1488
1488
1488
1488
1488