Canon GL2 - Manual (Page 129)

129
E
Using a Memor
y Car
d
Combine a title image recorded on a memory card with camcorder recordings. You can change the
color of a title and adjust the mix level.
• Speedlite and video light cannot be used when creating a title.
1. Insert a memory card into the camcorder.
2. Slide the POWER switch to CAMERA and the TAPE/CARD switch to TAPE.
3. Open the menu and select \ TITLE MIX.
• The title mix menu appears.
4. Select
\ CREATE TITLE.
• The CREATE TITLE menu appears.
5. Press the PHOTO button halfway.
•
F flashes white and turns green and glows steady.
6. Press the PHOTO button fully.
• F disappears and the camcorder records the title.
1. Select COLOR SELECT from the CREATE TITLE menu.
2. Select the color by pulling the SELECT dial up or down.
3. Press the SELECT dial in.
1. Select MIX LEVEL from the CREATE TITLE menu.
2. Adjust the mix level by pulling the SELECT dial up or down.
3. Press the SELECT dial in.
• You have to record the title onto the memory card in order to use the title mix function.
1. Select RECORD from the CREATE TITLE menu.
2. Press the SELECT dial in.
• The camcorder records the title onto the memory card.
Note:
Title images may be assigned the same file number depending on the color selection.
Recording the Title Image onto the Memory Card
Adjusting the Mix Level
Selecting the Color
Combining Images and Recording Them onto a Tape (Title Mix)
+
CAMERA TAPE
Creating a Title Image
TITLE MIX
( 20)