Canon GL2 - Manual (Page 103)

103
E
Editing
Connecting the camcorder to your VCR or 8 mm video camera allows conversion of recorded
analog video and audio signals to digital signals in an instant. The digital signals can be output to
the other equipment with a DV terminal. The camcorder’s DV terminal works exclusively as an
output terminal.
• There may be cases where analog-digital conversion cannot be done properly, depending on the
signals output from the connected equipment.
For example: Signals that include the copyright protective signal, or anomalous signals such as
ones that include ghost signals, etc.
• You are recommended to use power from a household power source with a power adapter.
• Do not operate with a cassette inserted to the camcorder.
• Turn off the power of all equipment before performing connections.
• Refer also to the instruction manuals of the other equipment connected.
Digitally Outputting Analog Video and Audio Signals
(Analog-Digital Converter)
DV
IN/OUT
S-VIDEO
VIDEO
R
L
AUDIO
OUTPUT
STV-250N Stereo Video Cable
: Signal flow
: Signal flow
S-150 S-video Cable
Signal flow :
Side with
arrow
Above illustration shows the connection using a S-video cable. You can also connect the yellow
plug to the VIDEO terminal instead.