Canon GL2 - Manual (Page 31)

31
E
Preparations
The tally lamp lets you know that the camcorder is recording.
However, its flashing may be reflected into the lens during
close-up recording, or when recording through glass.
You may therefore decide to turn it off.
TALLY LAMP•• ON SYSTEM
( 20)
1. Open the menu and select TALLY LAMP.
2. Select the OFF setting and close the menu.
• The tally lamp no longer flashes during recording, but it will still light up when the camcorder
receives a signal from the wireless controller.
+
,
+
,
+ PLAY
(VCR)
CARD
PLAY
(VCR)
TAPE CAMERA TAPE
Turning Off the Tally Lamp