Canon GL2 - Manual (Page 104)

104
E
Editing
AV DV OUT••• OFF VCR SET UP
( 20)
To turn the analog-digital converter on, open the menu and select VCR SET UP.
Then select AV
\ DV OUT, set it to ON and close the menu.
Caution:
• For normal use, set AV \ DV OUT to OFF through the menu. If it is set to ON, you cannot input
digital signals through the camcorder’s DV terminal.
• If you attempt to perform analog-digital conversion with a cassette inserted to the camcorder, the
converted signals may not be output to the connected digital video equipment.
• When connecting to a PC equipped with a DV terminal, you may not be able to transfer
converted signals to your PC, depending on the software you are using, and the specifications of
your PC and its settings.
+ PLAY
(VCR)
TAPE
Turning the Analog-Digital Converter On